AMagic AES-S3504UE Instrukcja Użytkownika Pobierz pdf (Strona 32)

2. A message will appear listing all of the devices that the Eject icon controls. Click on the “Safely remove

USB Mass Storage Device” item.

3. The following message then appears: “Safe to Remove Hardware”. You can now safely disconnect the

device from your computer.

Note: If your host USB adapter does not support this feature, the device should be disabled using the

Device Manager or your system should be shut down cleanly and powered off before disconnecting

the USB device.

4.3.2 MACINTOSH SYSTEMS

You must un-mount the hard disk drive by dragging the hard drive icon to the trash before disconnecting it

or powering it down.

4.4 HARD DISK DRIVE HOT-PLUG & HOT-UNPLUG

The hard disk drives should not be hot-plugged, but can be hot-unplugged while the system is running. However,

to avoid data corruption or loss, care should be taken to ensure that the host system is not currently using any

drive that is about to be hot-unplugged.

4.5 LED INDICATIVE STATUS

The AES-S3504UE provides information on the SATA HDDs, PC Link, and Power LEDs.

Each LED activity will turn On/Off the LED for approximately 70 ms. The blinking rate is approximately 400 ms On

and 400 ms Off.

Ver. 091015 AES-S3504UE User’s Manual

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 63 64

Brak uwag

AMagic AES-S3504UE Instrukcja Użytkownika Strona 32